Need hot water for a washbasin or sink? A DAFI instantaneous electric water heater installed near the tap may be suitable when its flow rate and power supply requirements match your needs. An electric storage water heater heats a reserve of water and supplies it to the connected outlets. To choose, compare the volume you use, the flow rate you need, the space available and your existing installation.
The table compares a DAFI heater installed near the water outlet with a storage water heater with a resistance element. Dimensions, performance and connection requirements depend on the model you choose.
| Criterion | DAFI near the water outlet | Storage water heater with a resistance element |
|---|---|---|
| How it works | Heats water as it flows through, without storing hot water. | Heats and stores a reserve of water in a tank. |
| Flow rate and temperature | The outlet temperature depends on rated power, flow rate and incoming water temperature. | Comfort depends on the available reserve, its temperature and the flow rate required. |
| Extended use | There is no stored reserve to exhaust; flow rate and temperature rise remain limited by the heater's capacity. | After a large amount of water has been drawn off, time may be needed to reheat the tank. |
| Space required | Housing, connections, kit components and access to the heater. | Tank, connections and access. Overall size varies with the model and capacity. |
| Power supply | Check the rated power and voltage of the product reference against the electrical installation. | Check the power supply and protective devices against the model and its instructions. |
| Storage and distribution | No reserve of water to keep hot. Installing the heater near the tap limits the length of the hot water distribution pipework. | Storage causes heat losses, which vary with factors including insulation and temperature. Distribution depends on the location. |
| Maintenance | Follow the instructions for the exact product reference; take account of water quality and limescale. | Follow the storage water heater's instructions and the maintenance guidance for its components. |
Comparing heaters for a single tap? Read DAFI or a small storage water heater for a basin or sink. Using two examples, we discuss comfort in use, installation location and the cost of the complete solution.
These situations provide a starting point. Next, check whether the model can deliver the flow rate you expect at the temperature you want. A DAFI heater's outlet temperature depends on the flow rate. At the same rated power and incoming water temperature, a higher flow rate leaves less energy available per litre of water.
Our guide to choosing the rated power of a DAFI heater helps you compare rated power, voltage and flow rate under the stated conditions.
If you need to supply several outlets at the same time, first establish the total flow rate and temperature required. A correctly sized storage water heater can provide a reserve for these uses; its capacity and reheating time must suit your usage patterns.
For a shower, bath or replacement of the hot water system for an entire home, have a professional assess the complete solution. Several taps shown in a diagram, or the rated power of a heater alone, do not confirm suitability for that use.
A central system supplies several outlets from the same equipment. It can use different technologies and energy sources. A storage water heater can therefore form part of a central system; a small storage water heater can also be installed near a water outlet. The terms 'central' and 'storage' describe different characteristics.
Heating water near the outlet can shorten the hot water distribution route. The effect on waiting time at the tap and on heat losses depends on the pipe route, length and insulation. If you use several local heaters, also check their electrical requirements when operating at the same time.
Gas, heat pump and solar systems require a comparison that takes account of the home, the existing equipment and the energy source used.
kW describes power; kWh measures energy consumed. A lower rated power does not, by itself, demonstrate lower energy consumption.
To compare two solutions, use the same volume of water, incoming water temperature and temperature at the point of use. Take account of the energy needed for heating, storage and distribution losses, the actual price of energy, and the costs of purchase, installation and maintenance.
Having no stored reserve removes the losses associated with keeping that reserve hot. It does not allow a fixed percentage saving to be promised for every home. Compare actual needs and the installed cost of the solutions you are considering.
See the housing dimensions and available drawings, followed by the DAFI instructions and documentation. Have a qualified professional confirm the suitability of the electrical connection and installation.
Contact us before ordering with details of the water outlet, simultaneous uses, desired flow rate and temperature, available power supply and product references you are considering. We will help you compare DAFI offers; the professional examining the installation is responsible for confirming its suitability.